Zurich 56218, Owner'S Manual

Page: 18 / 101

Using the Scan Tool
NETWORK TEST
16
For technical questions, please call 1-888-866-5797.
n
If the Scan Tool fails to link to the vehicle’s computer, a
"Communication Error" message shows.
- Ensure your vehicle is OBD2 compliant.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Choose Relink to try again, or, choose System Menu to return
to the System Menu.
n
If the Scan Tool cannot link to the vehicle’s computer after three
attempts, the message “Contact Technical Support” displays.
- Choose
System Menu to return to the System Menu.
- Turn the ignition off, and disconnect the Scan Tool.
- Contact Technical Support for assistance.
2.
Refer to DISPLAY FUNCTIONS on
page 3 for a description of LCD display
elements.
If the definition for the currently
displayed code is not available, an
advisory message shows.
I/M MONITOR STATUS icons are not
displayed when viewing SRS DTCs.
In the case of long code definitions, a small arrow is shown in
the upper/lower right-hand corner of the code display area to
indicate the presence of additional information.
n
If no codes are present, the message "No SRS DTC’s are presently
stored in the vehicle’s computer" shows. Choose
System Menu to
return to the System Menu.
3.
If more than one code was retrieved press DTC/FF to display
additional codes one at a time.
n
Whenever the Scroll function is used, the Scan Tool’s
communication link with the vehicle’s computer disconnects. To
re-establish communication, press
POWER/LINK again.
4.
When the last retrieved DTC has been displayed and DTC/FF is pressed,
the Scan Tool returns to the “Priority” code.
n
To exit the enhanced mode, choose System Menu to return to the
System Menu. Select Global OBD , then press ENTER to
return to the Global OBD2 mode.
NETWORK TEST
The Network Test lets you perform a scan of all vehicle modules, or of a
single selected module, to retrieve DTCs associated with the module(s).