Additional Tests
SYSTEM/ACTUATOR TESTS
36
For technical questions, please call 1-888-866-5797.
1.
Select
ESIM Forced Monitor Test
in the Special Functions menu,
then press
ENTER
.
n
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Start and idle the engine.
- When repeating the test, allow 30 seconds between tests.
2.
Choose
Yes
to continue.
n
A “status” screen displays while a
vehicle status check is performed.
3.
A “confirmation” screen displays when
the test routine begins.
n
A “results” screen displays when the
learn procedure has completed.
Depending on the results returned,
the screen shows one of the following:
- the message “Routine is complete”
- Live Data for
NGC Routine Status
,
Large Leak Monitor
Status
,
ESIM Switch Closed
,
Purge Duty Cycle
,
Purge
AirFlow
and
ESIM Frozen Test Timer
4.
Choose
Finish
to return to the Special Functions menu.
ETC System Test (001)
The ETC System Test lets you perform an Electronic Throttle Control
(ETC) system test.
1.
Select
ETC System Test
in the Special Functions menu, then press
ENTER
.
n
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2.
Choose
Yes
to continue.
n
A “status” screen displays while a vehicle status check is
performed.
n
The Select Throttle Position screen displays.
3.
Select
Normal
,
Closed
,
Open
or the desired percentage (from
10%
to
70%
), then press
ENTER
.
Summary of Contents for 56218
Page 1: ......
Page 101: ...56218 2 1 ...
