Zurich 56218 Owner'S Manual Download Page 71

Page: 71 / 101

Additional Tests

SYSTEM/ACTUATOR TESTS

For technical questions, please call 1-888-866-5797.

Cooling Fan

The Cooling Fan functions let you control operation of the battery cooling
fan motor.

Select

Cooling Fan Hi

Cooling Fan Mid

Cooling Fan Lo

Cooling Fan Stop

, in the PCM Actuator Test and Special Function

Menu, as desired, then press

ENTER

An “instructional” screen displays. Prepare the vehicle for test as

directed:

- Place the transmission in NEUTRAL.

- Verify the Ready Light is ON.

Choose

Continue

to proceed.

The Control Cooling Fan screen displays.

Choose

to turn the cooling fan On. Choose

Off

to turn the cooling

fan off.

It may take from 3 to 10

seconds for cooling fan speed

to change.

The display refreshes to show the

results. Repeat as desired.

Choose

Exit

to return to the PCM

Actuator Test and Special Function

Menu.

OFF Ave Cg Relay

The OFF Ave Cg Relay function lets you activate and deactivate the THS

charger adapter relay.

Select

OFF Ave Cg Relay

in the PCM Actuator Test and Special

Function Menu, then press

ENTER

An “instructional” screen displays. Prepare the vehicle for test as

directed:

- Place the transmission in NEUTRAL.

- Verify the Ready Light is ON.

Choose

Continue

to proceed.

The Control Relay screen displays.

Choose

to activate the relay. Choose

Off

to deactivate the relay.

The display refreshes to show the

results. Repeat as desired.

Choose

Exit

to return to the PCM

Actuator Test and Special Function

Menu.

Summary of Contents for 56218






































































































Search results

Summary of Contents for 56218

Reviews:

Related manuals for 56218

Brands by name

Popular brands

Zurich 56218, Owner'S Manual

Search results

Summary of Contents for 56218

Reviews:

Related manuals for 56218

Brands by name

Popular brands