Additional Tests
SYSTEM/ACTUATOR TESTS
For technical questions, please call 1-888-866-5797.
57
2.
Choose
Input New Value
to continue.
n
The Enter Value screen displays.
3.
Use the
UP (G)
and
DOWN (G)
buttons
to specify the desired percentage of
remaining engine oil life.
4.
Choose
Perform Reset
to continue.
n
A “confirmation” screen shows the
new
Engine Oil Life Value
.
5.
Choose
Exit
to return to the ECM
Special Functions menu.
Crankshaft Position Variation Learn
The Crankshaft Position Variation Learn
function lets you perform the “learning”
procedure for crankshaft position variation.
1.
Select
Crankshaft Position Variation Learn
in the ECM Special
Functions menu, then press
ENTER
.
n
An “instructional” screen displays. Prepare the vehicle for test as
directed:
Choose
Next
as necessary to scroll the “instructional”
screen.
- Block all drive wheels.
- Set the parking brake. (DO NOT apply the brake pedal at this time.)
- Turn the ignition on. DO NOT start the engine at this time.
- Press and hold the brake pedal.
- Start and idle the engine.
- Make sure the A/C system is off.
- Place the transmission in PARK or NEUTRAL.
2.
Choose
Next
to continue.
n
If engine coolant temperature is less than 70°C, a status screen
displays.
n
When engine coolant temperature is greater than 70°C, an
“instructional” screen displays.
- Cycle the ignition off then back on.
- Start and idle the engine.
3.
Choose
Next
to continue.
n
A “status” screen displays.
n
The screen shows the current values for
Engine Speed
,
TP
Indicated Angle
,
ECT Sensor
,
A/C Relay Command
, and
APP
Indicated Angle
.
Summary of Contents for 56218
Page 1: ......
Page 101: ...56218 2 1 ...
