Zontes ZT350T-D, Maintenance Manual

Page: 149 / 152

149 / 152
d. Turn to the back and pull the cable out of the lock frame
in the direction of the arrow. Turn back the front and remove
M6× 14 with 4 # hexagonal socket bolts. At the same time,
grasp the right storage box lock assembly
①
and the
electronic front storage box lock assembly
②
on the back.
e. Turn over to the back and remove 3 ST4.2 × 12 with 5 #
hexagonal socket After self tapping, remove the front
storage box switch from the panel. Remove the latch from
the switch.
f. Remove 2 expansion nails with 4 # hexagonal socket,
and remove the left and right cover plates of the storage box.
Use a cross screwdriver to remove the two cross tapping
screws on the front left storage box cover, and remove the
non inductive antenna. Remove the five front left storage
box rear glues. Loosen the plastic nut pointed by the arrow,
take out the USB charging cable, and remove the matching
charging port rubber sleeve.
g. Remove 2 M6× 16 with 5 # hexagonal socket. Separate
the right storage box lock bracket from the right storage box
lock.
h. Use a Phillips screwdriver to remove three M4 × 25.
Remove the electronic storage box lock after the bolt.
Removal of left and right pedals and
surrounding left and right parts
a. Use a screwdriver to lift out the pedal rubber pad and
pedal rubber pad pressing plate from the position indicated
by the small arrow, and pull up the pedal rubber pad and
pedal rubber pad pressing plate in the direction of the big
arrow until the pedal rubber pad and the rear pedal rubber
pad pressing plate are taken out.
Caution: When using the screwdriver, wrap the
screwdriver with non-woven fabric and other tools to
prevent scratching the paint surface.
b. Remove the M6× 14 Shoulder bolt (1) at three places on
the left pedal with the 4 # hexagonal socket. Remove the
pedal together with the left surround.
c. Use 4 # hexagonal socket to remove the two M6× 14
Shoulder bolt (1) parts on the left of the middle part of the
enclosure.