Zontes ZT350T-D, Maintenance Manual

Page: 148 / 152

148 / 152
Disassembly the left and right storage
boxes
a. Press the switch indicated by the small arrow to open
the front right storage box; Remove M6× 14 Shoulder bolt (1)
with 4 # hexagonal socket. Remove the front right storage
box cover and the front right storage box inner cover bracket
togethe
b. Take down the circlip with pointed nose pliers and pull
out the rotary shaft. Remove the torsion spring and damping.
Pay attention to the position of the torsion spring during
installation.
c. Remove 3 M6 × 14 with 4 # hexagonal socket to
separate the inner and outer covers. Remove 3 clamp nuts
from the outer cover.
d. Open the front left storage box. There are three ways to
open the front left storage box:
1. Before removing the battery, press the switch next to
the switch for opening the front right storage box to open
the front left storage box. 2. Use the battery to connect the
positive and negative poles of the main harness to turn on
the motorcycle. Press the switch next to the front right
storage box switch to open the front left storage box. 3. Find
the front left storage box switch next to the tap lock and
behind the front left storage box, and turn the protruding
part of the switch outward in the direction of the arrow to
open the front left storage box.
e. Disassemble the left storage box outer cover according
to the steps of the right storage box outer cover.
Removal of front storage box panel
a. Remove 2 non-standard M6× 14 on the front storage
box panel with 4 # hexagonal socket.
b. Find and unplug the front left storage box lock
connector and front storage box switch on the front storage
box next to the tap lock on the left side of the front storage
box panel.
c. Find and unplug the PKE connector of PKE on the right
side of the front storage box panel, and find and unplug the
OBD connector on the left side of the front storage box
panel. Remove the front storage box panel.