64
/
152
f. Grasp the rear right shock absorber and remove the bolt
(10) with a 16 # socket or ratchet wrench, then remove the
bolt (9) and replace the rear right shock absorber. When
replacing the shock absorber, replace one side of the shock
absorber before replacing the other side. On the left side, use
a 16 # ratchet wrench to remove the bolt (10). Standard
torque of bolt (10): 24N. m (2.4 kgf. m, 18 lbf. ft).
Bolts and nuts for body and engine
installation
Caution:
●Regularly check the body fasteners according to the
maintenance schedule.
●Loose engine fasteners will increase the vibration and affect
the driving experience.
1. Check the fasteners for the critical parts
Check whether the front disc brake caliper bolts, front
shock absorber bottom cylinder bolts, lower link plate bolts,
rear rocker arm and engine connecting bolts, rear wheel
spline shaft nuts, rear disc brake caliper bolts, and side
bracket nuts are loose. Check whether the Split pin of the
main bracket shaft is abnormal.
2. Check engine fasteners
Standard torque of 5 M12 nuts of engine cradle: 65N.m
(6.6 kgf.m, 48 lbf.ft).
a. Refer to the steps for removing the rear storage box and
tail skirt to remove it to the extent shown in the figure.
b. Check if the four nuts on the rear cradle of the fixed
engine as shown in the figure are loose. The nut on the right
front part (a in the figure) needs to be pulled out or pulled
out of the high-pressure oil pipe and cable connector to
facilitate tightening with tools.
c. Check whether the engine nut is loose.
Summary of Contents for ZT350T-D
