Zontes ZT350T-D, Maintenance Manual

Page: 146 / 152

146 / 152
b. Unfasten the wire clamp and tidy up the harness.
c. Push the storage box away slightly, use 8 # socket to
remove the bolt (1), and remove the bushing (2) and buffer
rubber (3). Remove the bolts on the other side in the same
way.
d. Hold the headlamp with one hand and take it out for a
distance, pull out the headlamp plug with the other hand and
take out the headlamp completely.
Removal of windshield base
a. Find two plugs of the windshield controller at the
windshield motor and pull them out. Remove M6 fixing
windshield motor with 4 # hexagonal socket × 16. Remove
the windshield motor, bushing and buffer rubber.
b. Remove the two M6× 16 on the hydraulic control unit
bracket with 8 # socket. Remove the hydraulic control unit
with bolts. Remove M8 from horn bracket with 6 # hexagonal
socket × 30, remove the horn.
c. Grasp the windshield base assembly and remove 3 M8 ×
25 bolts with 12 # socket, remove the windshield base
assembly from the motorcycle.
d. Remove 2 circlips with pointed nose pliers, grasp the
left windshield bracket, take down the pin shaft and buffer
rubber, and take down the rocker arm spring. Remove the
right windshield and rocker spring in the same way
.
e. Remove 2 M6× 16 with 4 # hexagonal socket. Remove
the spring washer. Separate the windshield motor pressing
plate, windshield motor assembly and windshield base
assembly.