Zontes ZT350T-D, Maintenance Manual

Page: 63 / 152

63 / 152
2.2 Adjust the left rear shock absorption
D350
Use the 5# inner hexagon to insert into the hole of the left
rear shock absorber adjuster, and rotate to the required gear
in the direction of the arrow.
3. Replace the shock absorption
a. Remove the muffler assembly.
Remove the rear storage box by referring to steps a to c of
"Removing the Stepper Motor and Cleaning Carbon Deposits"
in the throttle valve body.Refer to the steps in "Add coolant
to the main water tank" in the radiator to remove the right
side cover and the steps in "Remove the spark plug" in the
spark plug to remove the left side cover, as shown in the
figure below.
b. Remove the bolt decoration buckle (2) on the bolt and
remove 6 bolts (1) of M6×12 using 4# Allen; Use the 12#
sleeve to remove 5 bolts of M8×25 (4); Use 4# Allen to
remove one M6×14 shoulder bolt (3) at the connection
between the middle of the tail skirt and the rear armrest;
Grasp the rear armrest anywhere with both hands, lift the
rear armrest up in the direction of the arrow, and remove the
rear armrest.
c. Remove the two expansion nails and two bolts (5) at the
connection between the left and right parts of the fuel tank
cover plate and the tail group, and remove the bushing (6)
and buffer glue (7).
d. Press down the central cylindrical pin of 8 expansion
nails with 4 # hexagonal socket, then take down the
expansion nails, and take down the left and right parts,
middle parts and left and right tail lights (blue part) of the
rear tail group.
e. Pull the front of the rear mud pan downward, fix the nut
(8) with a 14 # socket, completely loosen the bolt (9) with a
14 # ratchet wrench on the inside, and remove the nut (8). Be
careful not to remove the bolt (9) first. Remove the nut (8) on
the other side in the same way. Torque standard of nut (8):
30N. m (3.1 kgf. m, 22 lbf. ft).