Zontes ZT350T-D, Maintenance Manual

Page: 136 / 152

136 / 152
c. Remove the left cover in the same way.
d. Remove two expansion nails and two bolts (5) at the
connection between the left and right part of the fuel tank
cover plate and the tail group respectively with 4 # socket
head and 8 # sleeve, and remove the bushing (6) and buffer
rubber (7).
e. Remove the 3 expansion pins connecting the left and
middle of the tail skirt using a 4# inner hexagon.
f.Remove the 3 expansion pins connecting the right and
middle of the tail skirt using a 4# inner hexagon.
g. Grasp both sides of the tail skirt and pull out the left and
right tail skirts together with the left and right tail lamps and
the middle of the tail skirt in the direction of the arrow. Note:
Pull out carefully to avoid scratching the cover and tail lamp.
h. Remove the left pedal by referring to”Removing the
Spark plig.
i. Remove the right paedal and surround the right part in
the same way.
j. Grasp the mark (green rectangle) of the surrounding
base plate with your hand and pull it back in the direction of
the arrow until you take out the surrounding base plate.
3. Put the coolant and pull out the
connection plug
a. Place appropriate utensils under the big arrow, wear
waterproof gloves, and then use 10 # socket to attach M6 ×
12 Drain bolt and φ five point six ×φ Remove the O-ring of 1
and drain the coolant; Use water hoop pliers to remove the
green hoop pointed by the small arrow, pull out the outlet
pipe of the main water tank, and drain the coolant.
b. Unplug the high-voltage package plug on the engine
head.