Zontes ZT350T-D, Maintenance Manual, Page: 145 / 152

145 / 152
b. Remove the M6× 14 Shoulder bolt (1) at the left of the
headlamp with the 4 # hexagonal socket. Remove the
expansion nail with 4 # hexagonal socket. Remove the bolts
and expansion nails on the other side in the same way.
c. Grasp the speedometer panel with one hand and lift it
slightly in the direction of the big arrow, and pull out the
speedometer plug connected to the speedometer with the
other hand.
Caution: When pulling out the plug, first press the lock
catch pointed by arrow a on the reverse side of the plug with
your finger, and then pull out the plug. Do not directly pull
out the speedometer plug; Finally, grasp both sides of the
speedometer panel and lift it in the direction of the big arrow
and pull it outward to take out the speedometer panel
Removal of front left and right panel
bottom lining
a. Use the 4 # hexagonal socket to remove one M6 × 14
Shoulder bolt (1) from the bottom lining of the left panel and
the surrounding upper part (red circle).
b. Remove 3 expansion nails (red circle) from the bottom
lining of the left panel with 4 # hexagonal socket; Remove 2
bolts (1) and 2 bolts (4) from the bottom lining of the left
panel with 4 # hexagonal socket, and remove the bushing (2)
and buffer rubber (3).
c. Unhook the plug fixed on the left panel lining and
arrange it to one side. Remove the bottom lining of the left
panel.
d. Use the same method to remove the right panel
underlay
Disassembly of headlights
a. Use 8 # socket to remove two M6 bolts (1) on the
headlight, and remove the bushing (2) and buffer rubber (3).