background image

Retrospec Chippy 

Kick Scooter

OWNER'S MANUAL

Ages 3+  |  Max rider weight 45 lbs / 20kgs  |  Adult assembly required  |  Close adult supervision required

Ages 3+ only.
Do not exceed weight limit indicated on the package: Max rider weight 44 lbs / 20kgs.
Rider weight does not necessarily mean a child’s size is appropriate to fit or maintain 
control on this scooter.
This product has no brake. Place feet on floor to stop.
Read and understand the enclosed owner’s manual and all other literature before 
riding this product.
Always wear safety equipment, such as helmet, knee pads, and elbow pads when 
riding your scooter and keep helmet’s chinstrap securely buckled. Always wear 
closed-toe shoes.
Ride on smooth , paved surfaces away from motor vehicles.
Avoid sharp bumps, drainage grates, and sudden surface changes which could cause 
scooter to suddenly stop.
Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet 
weather impairs traction, braking, and visibility.
Do not ride at night.

    AN IMPORTANT MESSAGE TO PARENTS:

This manual contains extremely important safety information. For your child’s safety, it is your responsibility to completely review this information with your child and make sure you instruct 
your child to follow all warnings, cautions, instructions and safety topics so that all riders are able to safely and responsibly use this scooter. All children and preteens should ride with adult 
guidance at all times. Retrospec recommends that you periodically review and reinforce all the information in this manual with all riders, and that you inspect and maintain your scooter to 
insure their safety.

    GENERAL WARNING:

Riding a scooter can be a dangerous activity. Certain conditions may cause components to fail without fault of the manufacturer. Scooters can, and are intended to move, and it is therefore 
possible to lose control, fall off and/or get into dangerous situations that no amount of care, instruction or expertise can eliminate. If such a thing does occur you can become seriously injured 
or die. 

LIKE ANY OTHER MOVING PRODUCT, USING A SCOOTER CAN BE A DANGEROUS ACTIVITY AND MAY RESULT IN INJURY OR DEATH EVEN WHEN USED WITH PROPER SAFETY 

PRECAUTIONS. USE AT YOUR OWN RISK AND USE COMMON SENSE.

    WARNING:

Avoid excessive speed associated with downhill rides.
Obey all local traffic and scooter riding laws and regulations. Check local laws and 
regulations.
Watch out for pedestrians.
Check and secure all fasteners before every ride.
Replace all worn and broken parts immediately.
To help reduce the risk of injury, adult supervision is required.
A parent’s decision to allow his or her child to ride this product should be based on 
the child’s skill, maturity, and ability.
Watch out for obstacles that could catch your wheel or force you to turn suddenly or 
lose control.
Be careful to avoid pedestrians, other wheeled products (such as skaters, 
skateboarders, scooters, bikes, etc.) and children or animals that may enter your path.
Never use in roadways, near motor vehicles, or on or near steep inclines or steps, 
swimming pools or other bodies of water.

    WARNING: 

Always wear protective gear including helmet, wrist guards, elbow and knee pads.

    WARNING: 

CHOKING HAZARD – Small parts, not for children under 3 years of age.

Summary of Contents for Chippy

Page 1: ...ion in this manual with all riders and that you inspect and maintain your scooter to insure their safety GENERAL WARNING Riding a scooter can be a dangerous activity Certain conditions may cause components to fail without fault of the manufacturer Scooters can and are intended to move and it is therefore possible to lose control fall off and or get into dangerous situations that no amount of care ...

Page 2: ...nut onto each of the two bolts Tighten with 10mm wrench Fig 3 3 Install handlebar pad over handlebar and secure with Velcro cover Fig 4 STEP 1 HANDLEBARS Tools 10mm wrench ASSEMBLY AND SET UP Fig 1 Carton Contents Scooter Owner s Manual 2 5mm hex wrenches 1 10mm 13mm double end wrench GRIPS PAD FRONT FORK HANDLEBAR T BAR COLLAR CLAMP COVER REAR WHEELS DECK TIGHTEN CLOCKWISE 10mm ...

Page 3: ... the other wheel onto the Axle then the Flat Washer insert 5mm Bolt Fig 5 Wheels are interchangeable 3 Tighten securely using the 2 5mm hex wrenches Fig 6 1 Insert Front Fork Assembly into Frame Steering Tube from the bottom up Fig 7 2 Slide Collar Clamp onto Front Fork Fig 7 Fig 7 STEP 3 FRONT FORK WHEEL ASSEMBLY Fig 5 COLLAR CLAMP FRAME STEERING TUBE FORK TUBE FRONT FORK ASSEMBLY AXLE BOLT 5mm W...

Page 4: ...ces and plastic parts Get in the habit of inspecting your scooter on a regular basis and before every ride CARE This product has no brake Step off to stop BRAKING STOPPING Fig 8 Fig 9 The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from the date of purchase This Limited Warranty does not cover normal wear and tear or any damage failure or loss c...

Reviews: