3、INDUCTION SYSTEM COMPONENT
18
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-061093 M6×22 Hexagon flange bolt
（
color zinc
）
2
2
1244200-117000 ZT40 Throttle valve desorption rubber tubing
1
3
1050954-035000 ZT310-R Fuel injector high pressure oil pipe unit
1
4
1051454-016000 45×2.5 Fluorine rubber O-ring
1
5
1050954-034000 ZT180MN Intake pipe assembly (Bosch)
1
6
1050954-023000 EV14 Fuel injector G48
1
7
1050968-002000 ZT1P58MJ Fuel injector fixator
1
8
1250105-138093 GB5789M6×20
（
color zinc
）
1
9
1051354-004000
Φ56×10 Hoop assembly
1
10
1050954-038000 Three-in-one valve body
⑽
1
11
1050954-025000 DLA-mini flangeless stepper motor 8mm
1
12
1050954-024000 CTS three-in-one sensor
1
after-sale
●
Throttle assembly
Use a wrench to remove the bolt (1), remove the throttle valve assembly, and remove the O-ring (4)
from
the intake pipe assembly (5).Then press the anti-loose snap ring near the injector holder (7) and
remove
the high pressure oil pipe,as shown in the lower right figure. Pull out the throttle valve desorption
rubber
tube (2) from the throttle valve body, use a sleeve to remove the bolt (8) that fixes the injector
holder (8)
to remove the holder, and remove the injector (6). Loosen the pipe clamp (9) between the
intake pipe
assembly (5) and the three-in-one valve body (10), remove the bolts
①
and
②
with a cross-shaped
screw, and take out the stepping motor (11) and the three-in-one sensor (12).
FIG.3 INTAKE SYSTEM
COMPONENT
Intake system component (Bosch EFI)
