6、COOLING SYSTEM COMPONENT
37
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1051454-014000 9.8×2.5 O-ring
3
2
1244200-016000 ZT310
－
R Chassis connected oil tube
1
5
1244100-034000
Seal gasketφ14×φ20×2
6
6
1244200-014000 ZT310
－
R Engine oil outlet tube
1
7
1244200-015000 ZT310
－
R Engine oil intake tube
1
4
1251100-089094 Oil passing bolt M14×1.50×32
（
environmental color
zinc
）
3
3
1251100-061093 M6×22 Hex flange bolt
（
8.8 degree/environmental
color zinc
）
3
PROCEDURE:
●
Chassis connected oil tube
Disassemble oil passing bolt
⑷
, seal gasket
⑸
with socket sleeve.
Disassemble bolt
⑶
close to engine with socket sleeve. Disassemble chassis connected oil tube. Take off O-ring
⑴
. See photo upper left.
●
Engine oil outlet tube
Disassemble oil passing bolt
⑷
, seal gasket
⑸
with socket sleeve. See photo middle left.
●
Engine oil intake tube
Disassemble oil passing bolt
⑷
, seal gasket
⑸
with socket sleeve. See photo left lower .
Disassemble bolt
⑶
with socket sleeve. Take off engine oil outlet tube
⑹
, engine oil intake tube
⑺
; Take off O-
ring
⑴
. See photo right lower.
CAUTION:
●
Disassembling the cooling system while the motorcycle is hot is prohibited. Wait until the engine and muffler
cool down thoroughly for the manipulation.
●
Wasted engine oil should be collected and hand over to qualified facilities for further treatment. Do not pour
the oil anywhere and avoid pollution of environment and water source.
●
Do not disassemble the oil tube violently in case of deformation of bush.
●
To avoil leakage, changing seal gasket and O-ring every time together with engine oil is suggested.
●
Be sure to wipe the connecting surface with clean nonwoven before reassembling.
Fig.3 COOLING SYSTEM
COMPONENT
Radiator tubing component
