14、MUFFLER COMPONENT
116
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
REMARKS
1
1250205-023000 GB70.1 Hexagon M8×35 (environmental color zinc)
2
2
1274100-074000 ZT310-R Muffler clamp
1
4024200-003035 ZT310-R Titanium rear muffler
4084200-001051 ZT310-R Dark gray rear muffler
4024200-004035 ZT310-R Titanium anti-hot plate
4084200-002051 ZT310-R Dark gray anti-hot plate
5
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
2
6
1250501-010000
GB93φ6 Spring washer
2
7
1124100-012000 ZT310-R Muffler graphite seal gasket (37.8×25×10)
1
FIG.1 MUFFLER
COMPONENT
Muffler rear assembly
3
1
4
1
PROCEDURE:
●
Remove the muffler rear assembly
Hold the muffler rear assembly in one hand, and use the hexagon tool to remove the bolt
⑴
from the space
between the frame tube and the pedal bracket. Remove the clamp
⑵
.
Remove the bolt
⑴
at the pedal bracket and remove the muffler rear assembly.
Remove the bolt
⑸
and remove the spring washer
⑹
.
Remove the anti-hot plate
⑷
from the muffler rear part
⑶
.
●
Graphite gasket
Remove the graphite gasket
⑺
and protect the nozzle. If there is any deformation, it may cause air leakage.
CAUTION:
●
The material should be protected during disassembly to prevent damage to the paint.
●
The muffler should be completely cooled before it is disassembled.
●
Prevent foreign matter from entering the interior of the muffler.
●
The muffler nozzle needs to be protected. If there is any deformation, it may cause air leakage.
●
It is recommended that new seals be replaced each time the muffler front assembly is removed to prevent air
leakage.
