12、REAR COVER COMPONENT
108
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
4
2
1251513-001019 6.3 x 12 x 1.6 copper gasket
3
3
1251100-102000 Non-standard bolt M6×16 (304 stainless steel)
2
4
1224200-040000 ZT310 Electrical device box cover
1
5
1244200-047000 ZT310-X Electric device box back glue
1
Electrical device box component 1 (lithium battery)
Fig.11 REAR COVER
COMPONENT
PROCEDURE:
●
Electrical device box component
Remove the bolts
⑴
on the left side of the front of the electrical component box remove the four washers
⑵
.
Remove the bolts
⑴
on the right side of the front of the electrical component box remove the four washers
⑵
.
Remove the
⑶
on the bottom of the rear frame of the frame.
Push the card in the direction of the arrow to snap the lower cover
⑷
.
Pull down the electrical device box backing
⑸
in the direction of the arrow.
Old state PKE:
Find the connectors
③
and
④
of the PKE antenna, unscrew the nut and pull it out. Connector
③
short antenna;
connector
④
long antenna.
New states PKE:
Find and unplug the connectors
⑤
of the PKE antenna(single).
Hold the electric device box component in one hand and grasp the front part downwards with one hand. Unplug
the PKE cable connectors
①
and
②
and remove the electrical device box component.
CAUTION:
●
Do not pull the cable directly when unplugging it.
●
If you need to replace the PKE fuse, you can directly replace the lower cover of the electrical device box to
replace it.
●
When refitting connector
②
, check whether the metal contacts inside are bent. If necessary, straighten them
first.
●
The old single-antenna version of the PKE assembly can be purchased directly as a bracelet version of the
PKE.
●
The number of copper gaskets (2). for some vehicles produced in the early stage sats is 8 pcs, and the
production is now 3 pcs.
ZT310 PKE Controller
（
single antenna
）
ZT310 PKE Controller
（
bracelet edition)
