5、FOOT PEDAL COMPONENT
32
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1250205-034093
GB70.1 Hex socket M8×30
（
environmental color-zinc
）
1
2
1250205-023000
GB70.1 Hex socket M8×35
（
environmental color-zinc
）
2
3
1251100-061093 M6×22Hexagon flange bolt 8.8 degree
1
4
1274200-037000 ZT310
－
R disc brake lock holder
1
5
1251100-101000 Non-standard boltM6×12
（
304 stanless steel
）
2
6
1251500-048000 ZT250
－
S Foot pedal holder washer
1
7
1251100-123093
Non-standard bolt M8×25
（
environmental color-zinc
）
1
Fig.5 FOOT PEDAL
COMPONENT
L, foot pedal holder component-1
PROCEDURE:
●
L, foot pedal holder assembly
Disassemble bolt
⑶
with ring spanner.Insert strait screwdriver into slot
①
and open a little bit the spline rocker
arm while pulling it out from gear shift axle of engine.
Disassemble bolt
⑴
, bolt
⑵
with hex socket tool. Take off left foot pedal holder assembly.
●
Disc brake lock holder
Turn over to the back side. Disassemble bolt
⑸
with hex socket tool.Take off disc brake lock holder
⑷
.
●
Gear shift rod assembly
Disassemble bolt
⑺
. Separate left foot pedal component and gear shift rod assembly from left foot pedal holder
assembly. Take off foot pedal holder washer
⑹
.
CAUTION:
●
Support the motorcycle properly while disassembling in case it falls down.
●
Pay attention to the alignment of foot pedal holder washer and the lug boss while reassembling.
●
Applying lubrification to the surface of cylinder of foot pedal holder can reduce resistance on gear shift rod.
