Setting Up Fixtures
Move to Set-Up: Fixture Set-Up, as
described in the section on Selecting
Set-Up Options on page 5-3.
1
Press the } key to move to the
four options available.
2
Use the [ and ] keys to select an
option from the following list: New
Fixture, Edit Existing Type, Variant
of Existing and Delete User types,
and press the } key. (See the
relevant sections below.)
Creating a New Fixture
Follow the instructions in the previous
section on Setting Up Fixtures to select
a New Fixture.
1
Press the } key. Enter the
manufacturers name.
2
Press the } key. Enter the fixture
type (see the paragraph on Fixture
Types page 5-20).
3
Press the } key. If the Fixture
Type is a composite, the subfixture
line becomes active (See previous
section on Composite fixtures on
page 5-21).
If the fixture type is not a
composite the Active line jumps to
Brightness.
4
Enter the parameter data for each
of the subfixtures as described in
the Entering / Modifying Parameter
Data section
5
Modify the Wheel assignments if
required see page 5-25
/p5-22/3
Editing an Existing Fixture
Follow the instructions in the section on
Setting Up Fixtures above to select
Edit Existing Type.
1
Press the } key. A list of fixture
manufacturers appears on the
monitor. Use the { and } keys to
select a manufacturer and press
PROGRAM.
2
A list of available fixture types from
that manufacturer appears. Use
the { and } keys to select a
fixture and press PROGRAM.
3
The manufacturer and type
selected are displayed on the
monitor.
4
Press the } key. If the fixture type
is a composite, the subfixture line
becomes active. If not, the active
bar jumps to Brightness.
5
Modify the parameter data as
required.
6
Modify wheel assignment as
required.
Creating a Variant
This feature is not yet available.
Deleting a User Fixture Type
Follow the instructions in the section on
Setting Up Fixtures to select Delete
User Type.
1
Press the } key. A list of fixture
manufacturers appears on the
monitor. Use the { and } keys to
select a manufacturer and press
the PROGRAM button.
2
A list of User fixture types from that
manufacture appears. Use the {
and } keys to select a fixture. To
delete the fixture press the
PROGRAM button.
3
A warning is displayed. Press the
PROGRAM button to continue or
[ to abandon the operation.
Subfixtures
It is only possible to enter the
subfixtures section if the fixture type is
a composite (with + appearing in the
fixture type).
1
Use the { and } keys to move to
the subfixtures line. Then use the
[ and ] keys to move between
subfixtures.
2
Once the subfixture has been
selected press } key to enter or
modify parameter data.
3
When the all the parameter data
for that subfixture is complete,
return to subfixtures and select the
next sub fixture using the
[ and ] keys.
Press the } key and enter or
modify parameters for the next
subfixture.
4
Repeat sections 1 to 3 until all
data for all subfixtures is complete.
Entering / Modifying Parameter Data
The Method for entering and modifying
parameter data is the same for each
attribute.
1
Use the { and } keys to select the
required attribute (Brightness,
Colour, Beamshape, Position or
Other)
2
Press the ] key to open the
parameter info window see figure
5-20
3
Enter or modify the parameter data
as described in the following
section Entering Parameter
Information on the following page
4
Repeat steps 1 to 3 for each
parameter to be entered or
modified.
5
Set-Up: Fixture Set-Up
5 - 22
7364000/p5-22/3
Summary of Contents for SIRIUS 500
