Zero 88 SIRIUS 500, Operator'S Manual

Page: 29 / 119

Submasters
It is possible to transfer any
programmed Brightness memory to
any of the four pages of submaster
faders for later use. A memory can be
transferred to a submaster with its fade
in and fade out times, or with no time. If
transferred with time, the actual fader
movement does not directly control the
output level. The fader movement
initiates the fade time, which controls
the output level.
Viewing the Content of any
Submaster
1 To see which memory has been
transferred to a submaster, press
and hold the INFO button and
press the relevant SUBMASTER
FLASH button.
Submaster Info:
User Info/Text
2 Release both buttons.
Transferring to a Submaster Fader
1 Decide whether the memory needs
to be transferred with time or
without time.
2 Press and hold the TRANSFER
WITH TIME or TRANSFER NO
TIME button, as appropriate. When
transferring with time, the Memory
Display shows:
Trans Mem 9 T []
User Info/Text
Push Submaster Flash
Or when transferring without time:
Trans Mem 9 []
User Info/Text
Push Submaster Flash
Use the [ and ] keys to select the
correct memory (see Figure 3-10).
3 Once the correct memory is
displayed, press PAGE button 1, 2,
3 or 4 to select the correct
submaster page, and press and
release the SUBMASTER fader
FLASH button.
4 Release the TRANSFER button.
/p3-10/3
NOTE
Edited Memories
Memories that are edited after transferring
to a submaster must be re-transferred for
the changes to take effect.
Fade Times
Are generally accurate to XXX percent
WARNING
Overwriting a Submaster
Care must be taken as if a memory is
already assigned to the selected
SUBMASTER, it will be overwritten
permanently. No warning is given.
n
Figure 3-10: Transfer to submaster
3
Programming Memories
3 - 10
7364000/p3-10/3