Zero 88 SIRIUS 500, Operator'S Manual

Page: 66 / 119

Clearing CueLine
Accessing Super User
Press the [ and ] keys together,
whilst simultaneously turning the Key
Switch to PROGRAM mode.
The following options are available:
Clear Memories
Recovery
Language SetUp
Date & Time
Use the { and } keys to select the
option.
Once selected, use the ] key either to
enter the option or to change it.
To exit Super User turn the keyswitch
out of Program Mode.
MONITOR NOTES
:
Software Versions
The software versions are
continuously shown and therefore
there is no option to select.
/p4-9/1
Resetting CueLine
The CLEAR MEMORIES feature,
allows the resetting of all memories or
one type of memory to factory defaults.
1 Use the { and } keys to Select
CLEAR MEMORIES
Super User:
CLEAR MEMORIES ]
Press ] to select
or } for next Option
2 Press the ] key to enter Clear
Memory. The Memory Display
shows:
Clear Memories
BRIGHTNESS ONLY {}
Press ] to Clear
Or [ to Abort
3 Use the { and } keys to select
CueLine from the following
options:
Brightness only
Colour only
Beamshape only
Position only
CueLine
Brightness Submasters
Focus Submasters
Clear All Memories
4 Once selected, press the ] key to
clear.
The Memory Display shows:
**WARNING**
CUELINE MEMORIES
Press Prog to Clear
Or [ to Abort
5 Press the PROGRAM button to
clear or the [ key to abort the
operation.
WARNING
Clearing Memories
Care must be exercised as this
operation clears all memories of the
type selected.
n
Figure 4-16: Clearing Memories
4
Clearing CueLine
7364000/p4-9/1
4 - 9