Zeiss INTRABEAM Instructions For Use Manual Download Page 7

Page: 7 / 82

INTRABEAM Water Phantom

Version 6.2
G-30-1767-en

Page 7

Measuring isotropy without spherical applicator.............................56

Positioning the probe tip for isotropy measurement ..................................56

Positioning the rotary feedthrough ............................................................57

Measuring isotropy....................................................................................58

Measuring isotropy with spherical applicator ..................................58

Positioning the applicator with the XRS probe for isotropy
measurement ............................................................................................58

Recording the depth dose curve with a flat applicator or
surface applicator ............................................................................60

Water phantom procedure for depth dose curve measurements
using a flat or surface applicator................................................................62

Care and maintenance

Safety inspection .............................................................................67

Calibration of the IC ionization chamber .........................................67

Transporting the water phantom ....................................................68

Care of the water phantom ............................................................. 68

Calibration and maintenance of the positioning unit .......................69

Calibrating the positioning unit..................................................................69

Maintenance of the positioning unit ..........................................................70

Relubricating the positioning unit ..............................................................70

Disposal ........................................................................................... 71

System data

Ordering data ..................................................................................72

Technical data ................................................................................. 72

Summary of Contents for INTRABEAM



















































































Search results

Summary of Contents for INTRABEAM

Reviews:

Related manuals for INTRABEAM

Brands by name

Popular brands

Zeiss INTRABEAM, Instructions For Use Manual

Search results

Summary of Contents for INTRABEAM

Reviews:

Related manuals for INTRABEAM

Brands by name

Popular brands