Axio Imager 2
OPERATION
ZEISS
Operating the motorized microscope via the touchscreen of the TFT display
01/2016
430000-7544-001
139
Illumination RL
The light source to be employed for reflected light
must be indicated here.
If a switching mirror for two illuminators is used, it
will appear in this configuration menu following
successful initialization. It is operated either via the
function buttons (for allocation, see below), or the
function is automatically linked with the selection
of an allocated reflector module. This means that
the user does not have to consider any additional
components.
Sources of illumination:
−
None
−
HAL int.
−
HAL ext.
−
HBO
−
FluoArc
−
HXP
−
Colibri
−
LED int.
−
LED ext.
−
VisLED int.
−
VisLED ext.
The "internal" or "external" suffix denotes that the component is connected either to the power supply
incorporated in the stand or to an external CAN bus power supply connected to the stand via CAN bus.
Only different types of lamps can be configured.
An error message will appear in the event of dual
allocation.
Fig. 154
RL illumination
Fig. 155
RL illumination error message
