ZEISS
OPERATION
Axio Imager 2
Operating the motorized microscope via the touchscreen of the TFT display
134
430000-7544-001
01/2016
Stage lowering
The stage lowering function is activated or
deactivated using the
On
and
Off
buttons.
The lowering depth can be set in 1 mm steps using
the
◄►
buttons in a range of values between 1
mm and 20 mm. To run the configuration
procedure, press the
Save
button. To abort the
procedure, press the
Cancel
button.
Software limit (Focus delimiter)
The motorized stands of the second generation
Axio Imager 2 are equipped with a software focus
limiter which can be set by users. They can be
globally switched
On
or
Off
here.
Once the software limit function is active, the
focus delimiter can also be set and altered using
the Work / Load buttons on the stand.
−
To set the focus limit:
Keep the upper button depressed for more than
3 seconds. (A beep will sound as
acknowledgment.)
−
To shift the focus limit:
Keep the upper button depressed for more than
3 seconds (a beep will sound as
acknowledgment) while moving the focus to
the new position. When the button is released,
the current focus position will be saved and
acknowledged by a message appearing on the
TFT.
−
To delete the focus limit:
Press the
Off
button on the TFT.
Fig. 141
Stage lowering
Fig. 142
Focus delimiter
