Axio Imager 2
FIRST-TIME SET-UP
ZEISS
Mount sample stage
01/2016
430000-7544-001
71
The hole spacings of the specimen
holder are shown in Fig. 62.
3.35.2
Rotatable mechanical stage
75x50/240° R
(1)
Removing the stage
•
Loosen screw cap (Fig. 63/
3
) from the spring
housing (roughly three rotations).
•
Turn back centering screws (Fig. 63/
1
), if
necessary.
•
Press the stage to the front against spring pin
(Fig. 63/
4
), lift it off the stage carrier (Fig. 63/
2
)
from the back and remove it upwards.
•
Retighten screw cap (Fig. 63/
3
).
(2)
Attaching the stage
•
Loosen screw cap (Fig. 63/
3
) from the spring
housing (roughly three rotations).
•
Place the stage with the dovetail groove on the
spring pin (Fig. 63/
4
).
•
Press the stage to the front against the spring
pin and lower it towards the back of stage
carrier (Fig. 63/
2
), and then release it.
•
Retighten screw cap (Fig. 63/
3
).
Fig. 62
Hole spacing of the slide
Fig. 63
Changing the rotatable mechanical
stage
