Axio Imager 2
OPERATION
ZEISS
Operating the motorized microscope via the touchscreen of the TFT display
01/2016
430000-7544-001
125
(2)
Measure tab
This tab is only accessible if you use a
motorized (CAN bus) stage. Otherwise,
the
Start
button and a display for the
Z-distance
∆
Z are displayed on the
Position
tab.
Using the controls on the
Measure
tab, the
operator can perform simple distance
measurements in millimeters (mm). Three options
are available for these measurements:
−
Distance between two manually set positions
−
Distance between a manually set position
and a defined position
−
Distance between two defined positions
If the Z distance is to be measured, activate the
incl. Z
button.
•
Move to initial position.
•
Press the
Start
button. The display fields
∆
X,
∆
Y and
∆
Z are set to zero.
Every stage movement is shown in the,
∆
X,
∆
Y and
∆
Z fields.
The position buttons function as described in
(1) Position tab
above.
Fig. 125
Microscope -> XYZ-> Measure
