14-32
IM 253421-01E
14.3 Commands
RECall?
Function
Queries all the settings relating to recalling
data.
Syntax
RECall?
Example
RECALL?
→
:RECALL:STATE 0;INTERVAL 0,0,0
RECall:INTerval
Function
Sets the recalling interval/queries the current
setting.
Syntax
RECall:INTerval
{<NRf>,<NRf>,<NRf>|<String>}
RECall:INTerval?
{<NRf>,<NRf>,<NRf>}=0,0,0 to 99,59,59
{<String>}=HH:MM:SS
HH hour MM minutes
SS seconds
Example
RECALL:INTERVAL 0,0,0
RECALL:INTERVAL "00:00:00"
RECALL:INTERVAL?
→
:RECALL:INTERVAL 0,0,0
Description
Even when the interval has been set to 0,0,0,
the interval becomes 250ms in case of normal
measurement and 1s in case of harmonic
analysis.
RECall:PANel
Function
Retrieves the setting parameters file.
Syntax
RECall:PANel {<NRf>}
{<NRf>}=1 to 4 : file number
Example
RECALL:PANEL 1
RECall[:STATe]
Function
Turns recalling ON/OFF, queries the current
setting.
Syntax
RECall[:STATe] {<Boolean>}
RECall:STATe?
Example
RECALL:STATE ON
RECALL:STATE?
→
:RECALL:STATE 1
14.3.10 RECall Group
The commands in the RECall group are used to make settings relating to, and inquires about recalling data. This
allows you to make the same settings and inquiries as can be set using the lower menus of [MEMORY]-“rECAL” or
[MEMORY]-“PnLrC”.
:RECall
:
STAT e
<Space>
OFF
ON
<NRf>
?
INTer val
<Space>
<NRf>
,
<NRf>
,
<NRf>
?
PANel
<Space>
<NRf>
?
<Character String>
;
