14-21
IM 253421-01E
Communication Commands 2 (System of Commands Complying to the IEEE 488.2-1987 Standard)
14
14.3.5 DISPlay Group
The commands in the DISPlay group are used to make settings relating to, and inquiries about display. This allows
you to make the same settings and queries as when using the FUNCTION key or ELEMENT key on the front panel.
:DISPlay
<x>
:
MODE
<Space>
VALue
RANGe
ESCaling
?
RESolution
<Space>
HIGH
LOW
?
FUNCtion
<Space>
?
ELEMent
<Space>
<NRf>
?
?
<Display function>
;
DISPlay<x>:MODE
Function
Sets the contents of the display/queries the
current setting.
Syntax
DISPlay<x>:MODE {VALue|RANGe|ESCaling}
DISPlay<x>:MODE?
<x>= 1 to 3
1:Display A, 2:Display B,
3:Display C
VALue: displays measurement data
RANGe: displays the present range of
voltage and current, or the scaling
constants of the external sensor of
element 1.
ESCaling: displays the scaling constants
of the current external sensor
Example
DISPLAY1:MODE VALUE
DISPLAY1:MODE?
→
:DISPLAY1:MODE VALUE
Description
<x> will be ignored. The contents of all the
displays A to C will be received.
DISPlay<x>:RESolution
Function
Sets the number of displayed digits or queries
the current setting.
Syntax
DISPlay<x>:RESolution {HIGH|Low}
DISPlay<x>:RESolution?
<x>= 1 to 3
1: Display A, 2: Display B,
3: Display C
Example
DISPLAY1:RESOLUTION LOW
DISPLAY1:RESOLUTION?
→
:DISPLAY1:
RESOLUTION LOW
Description
<x> will be ignored.
The contents of all the displays A to C will be
received.
DISPlay<x>?
Function
Queries all the display settings.
Syntax
DISPlay<x>?
<x>= 1 to 3
1:Display A, 2:Display B,
3:Display C
Example
DISPlay1?
→
:DISPLAY1:MODE VALUE;FUNCTION
V;ELEMENT 1
DISPlay<x>:ELEMent
Function
Sets the element to be displayed/queries the
current setting.
Syntax
DISPlay<x>:ELEMent {<NRf>}
DISPlay<x>:ELEMent?
<x>= 1 to 3
1:Display A, 2:Display B
3:Display C
{<NRf>}= 1 (WT110E single-phase model)
1, 3 (WT130 three-phase, three-
wire model)
1 to 3 (WT130 three-phase,
four-wire model)
Example
DISPLAY1:ELEMENT 1
DISPLAY1:ELEMENT?
→
:DISPLAY1:ELEMENT 1
DISPlay<x>:FUNCtion
Function
Sets the function to be displayed/queries the
current setting.
S y n t a x
DISPlay<x>:FUNCtion {<display function>}
DISPlay<x>:FUNCtion?
<x>= 1 to 3
1:Display A, 2:Display B,
3:Display C
For normal measurement
<display function>= {V|A|W|VA|VAR|
PF|DEGRee|VHZ|AHZ|WH|WHP|WHM|AH|AHP|AHM|
MATH|VPK|APK|TIME}
For harmonic analysis
<display function>= {V|A|W|PF|VHZ|AHZ|
VTHD|ATHD|VCON|ACON|WCON|VDEG|ADEG|ORDer}
Example
DISPLAY1:FUNCTION V
DISPLAY1:FUNCTION?
→
:DISPLAY1:FUNCTION V
14.3 Commands
