9-20
IM 253421-01E
• Executing Output
After having connected the external plotter or printer to this instrument, execute the
output of data.
dATA: All data selected as output items will be output.
PnL: All setting parameters will be output.
Note
•
When the output items are to be sent by communication interface and they are set to V, A, P
or dEG, these items are then output. When the output item to be sent by communication is
set to ALL, not only the V and A data are output, but P and dEG data as well. When the
output item to be sent by communication is set to G-V to CG-P, the output data will not be the
graph, but the numerical values.
•
The orders are printed up to the maximum analysis order.
•
When the fundamental frequency lies outside the measurement range of the harmonic
analysis (display B will show FrqEr), an attempt to output will result in an error code.
•
When no analysis data are present, “- - - - -” will be printed.
•
There are cases where the active power value becomes negative. The corresponding
bargraph will be printed in thin print.
•
When no plotter is connected, output time-out will result in an error code.
9.9 Outputting to an External Plotter or Printer
