9-18
IM 253421-01E
9.9
Outputting to an External Plotter or Printer
Keys
DC
SCALING
AVG
FILTER
STORE
RECALL
HARMONICS
M W
h
k
A
h
m V
Hz
M W
k
A
deg
var
TIME
FUNCTION
AUTO
MODE
TRIG
MAX HOLD
HOLD
CAL
INTEGRATOR
HARMONICS
INTERFACE
OUTPUT
SHIFT
REMOTE
MEMORY
INTEG SET
ENTER
A RANGE
V RANGE
START
LOCAL
SETUP
STOP
RESET
AUTO
FUNCTION
FUNCTION
m V
PF
M W
k
A
m V
VA
V MEAN
RMS
A OVER
V OVER
SAMPLE
A
B
C
MODE
Displays
relevant
keys and
indicator
Procedure
•
Operate the instrument by following the thick lines in the menu below.
•
Press the ENTER key to confirm a selection or setting.
•
To leave the current menu in the middle of the operation, press the key indicated in step 1.
The confirmed settings up to that point are kept.
1.
SHIFT
LOCAL
INTERFACE
ENTER
3.
2.
ENTER
5.
4.
Set the output Mode
(Display C)
Communication setting
*
End
End
Set plotter or printer
(Display C)
• Setting the Output Mode
If the communication interface
that you purchased is an
RS-232-C, the menu proceeds
to the “Selecting handshaking
method” menu of page 11-3.
Set the relevant parameters
such as the handshaking
method, format, and baud rate,
then press the
ENTER key to
complete the settings. If the
communication interface is a
GP-IB, the procedure ends at
step 5.
SHIFT
SETUP
OUTPUT
ENTER
3.
(Display C)
(Display C)
2.
ENTER
5.
4.
Set the output items
(Display C)
ENTER
7.
End
6.
1.
• Setting the Output Items
*
The communication settings vary depending on the communication interface you purchased.
For details on the menus, see chapters 10 and 11.
