YOKOGAWA TA220, User Manual, Page: 170 / 178

13-4
IM 704610-01E
13.5 Input/Output on the Rear Panel
Item Specifications
External arming signal input (EXT ARM IN)
Connector type BNC
Input impedance 10 k Ω (typical value
†
)
Input coupling DC
Input level TTL level
Allowable input voltage –5 to 10 V (DC+ACpeak)
range
Minimum pulse width
30 ns
Inhibit signal input (INHIBIT IN)
Connector type BNC
Input impedance 10 k Ω (typical
†
)
Input coupling DC
Input level TTL level
Allowable input voltage –5 to 10 V (DC+ACpeak)
range
Minimum pulse width
30 ns
Jitter ratio DC output (JITTER DC OUT)
Connector type BNC
Output impedance 600
Ω
(typical value
†
)
Output coupling DC
Output mode Select jitter ratio DC output or determination output.
Output filter Average coefficient setting range: 1 to 10, setting resolution: 1
(output filter is disabled when D-to-C high speed calculation
††
is ON)
Jitter ratio output range Setting range: 0.00 to 100.00%, setting resolution: 0.01%
Determination output Range of determination level: 0.00% to 25.00%, resolution: 0.01%
Correction coefficient α Range: 0.0001 to 9.9999, resolution: 0.0001
Correction coefficient
β
Range: –9.999 to 9.999%, resolution: 0.001%
Output level
‡
0 to 5 VDC, Default setting: 0.2 V/%
Output level accuracy
‡, ‡‡
± 10 mV
RF signal voltage level DC output (LEVEL DC OUT)
Connector type BNC
Output impedance 600
Ω
(typical value
†
)
Output coupling DC
Output mode Select voltage level DC output or determination output
Output filter Setting range of average coefficient: 1 to 10, setting resolution: 1
Voltage level DC output Setting range: 0.000 to 5.000 V, setting resolution: 0.001 V
range
Determination output
Setting range of determination level: 0.000 to 5.000 V, setting resolution: 0.001 V
Output level
‡
0 to 5 VDC, Default setting: 1 V/Vp-p
Output level accuracy
‡, ‡‡
±
10 mV
RF signal monitor output (MONITOR OUT)
Connector type BNC
Output impedance 50 Ω (typical value
†
)
Output coupling DC
Output level
‡‡†
Approximately 1/2 the RF signal (within ± 5 V)
Equalized RF signal monitor output (EQUALIZED OUT)
Connector type BNC
Output impedance 50 Ω (typical value
†
)
Output coupling DC
Output level
‡‡†
• Approximately 1/2 the RF signal (within ± 5 V) when the equalizer is OFF and AGC is OFF.
• Approximately 0.4 to 0.7 Vp-p (within ± 1 V) when the equalizer is OFF and AGC is ON.
Data signal output (SLICED RF OUT)
Connector type BNC
Output impedance 50 Ω (typical value
†
)
Output coupling DC
Output level
‡‡†
Approximately ± 0.4 V