10-24
IM 704610-01E
10.2 Commands
:LVOut:JUDGe:LEVel
Function
Sets the upper and lower limit of the
determination level of the level measurement
output or queries the current setting.
Syntax
:LVOut:JUDGe:LEVel {<voltage>},
{<voltage>}
:LVOut:JUDGe:LEVel?
First argument <voltage> = 0.000 to 5.000 (in
steps of 0.001)
Second argument <voltage> = 0.000 to 5.000
(in steps of 0.001)
The first and second parameters are maximum
value and minimum value, respectively. If the
maximum value is less than or equal to the
minimum value, an error occurs.
Example
:LVOUT:JUDGE:LEVEL 3,2
:LVOUT:JUDGE:LEVEL?
-> LVOUT:JUDGE:LEVEL 3,2
:LVOut:JUDGe:RESult?
Function
Queries the determination result for level
measurement output.
Syntax
:LVOut:JUDGe:RESult?
Example
:LVOUT:JUDGE:RESULT?
-> GO
Description 1. GO is returned if the result is GO.
2. NOGO is returned if the result is NOGO.
10.2.9
MEASure Group
This group consists of commands related to measurement conditions.
:MEASure
:
FUNCtion
<Space>
DTOC
PWIDth
?
SPEed
?
E2T
;
?
The E2T parameter cannot be
set on products with suffix code
-BDS.
:MEASure?
Function
Queries all settings related to measurement
conditions.
Syntax
:MEASure?
Example
:MEASURE?
-> :MEASURE:FUNCTION DTOC
;SPEED 1.0E+00
:MEASure:FUNCtion
Function
Sets the measurement function or queries the
current setting.
Syntax
:MEASure:FUNCtion {DTOC|PWIDTH|E2T}
:MEASure:FUNCtion?
Example
:MEASURE:FUNCTION DTOC
:MEASURE:FUNCTION?
-> :MEASURE:FUNCTION DTOC
Explanation The E2T parameter cannot be set on products
with suffix code -BDS.
:MEASure:SPEed?
Function
Queries the measurement speed.
Syntax
:MEASure:SPEed?
Example
:MEASURE:SPEed?
-> :MEASURE:SPEED 1.0