10-16
IM 704610-01E
:DCOut:JUDGe:RESult?
Function
Queries the determination result.
Syntax
:DCOut:JUDGe:RESult?
Example
:DCOut:JUDGE:RESULT? -> GO
Description 1. Returns GO if the measured jitter ratio is valid
and equal to or lower than the determination
level.
2. Returns NOGO if the measured jitter ratio is
invalid or in excess of the determination level.
3. For D-to-C jitter measurement, returns
NOJUD if the clock signal was not
regenerated by the PLL circuit (unlock
status).
:DCOut:MODE
Function
Switches the DC output mode or queries the
current setting.
Syntax
:DCOut:MODE {JITTer|JUDGe}
:DCOut:MODE?
Example
:DCOUT:MODE JITTER
:DCOUT:MODE?
-> :DCOUT:MODE JITTER
10.2 Commands