YOKOGAWA DTSXL, User Manual, Page: 36 / 289

< PART – A Hardware >
A-13
IM 39J06B40-01EN 14th Edition: May 30, 2022
A1.7. POWER SUPPLY MODULE
One of the following power supply modules must be selected when configuring a DTSXL
system.
Dual-redundant configuration is not allowed for the power supply module.
Table Power Supply Modules Compatible with DTSXL System
Model Reference (Input voltage range)
NFPW426 10 to 30 V DC
NFPW441 100 to 120 V AC, 47 to 66 Hz
NFPW442 220 to 240 V AC, 47 to 66 Hz
NFPW444 21.6 to 31.2 V DC
SEE ALSO
For the specifications of the power supply modules, see GS 34P02Q13-01E “FCN-RTU Low Power
Autonomous Controller Hardware” and GS 34P02Q12-01E “FCN Autonomous Controller Hardware”.
A1.8. CPU MODULE
This is the CPU module for the autonomous controller.
One CPU module of the following model may be optionally installed onto the DTSBM10
base module.
Table CPU Module Compatible with DTSXL System
Model NFCP050
Dual-redundant configuration is not allowed for the CPU module.
STARDOM modules including I/O modules, bus repeater modules and serial
communication modules cannot be mounted on the DTSBM10 base module.
SEE ALSO
For details on the specifications of the CPU module, see GS34P02Q13-01E “FCN-RTU Low Power
Autonomous Controller Hardware”.