YOKOGAWA DTSXL, User Manual, Page: 179 / 289

< PART – B Software >
B-96
IM 39J06B40-01EN 14th Edition: May 30, 2022
TIP
The number of data values contained in the data section varies with the Calculation Range setting.
SEE ALSO
For details on the calculation range, see Subsection B7.3.1, "Fiber Settings."
B8.1.2. CSV Files
The mapping between configuration items and output items in CSV files is described in
this subsection.

Configuration Items
Well information and data output conditions can be configured.
Well information specifies locality and other information about the well to be measured,
as well as the output format of measurement start date and time in CSV files.
Data output conditions define the measurement data types to be output to CSV files,
and their units.
The table below lists the configuration items.
No Item Data Tip
1 COMPANY Company name
－
2 WELL Well name
－
3 FIELD Field name
－
4 LOCATION Location name
－
5 PROVINCE Province name
－
6 COUNTY County name
STATE State name
－
COUNTRY Country name
7 SERVICE Corp
Service company
name
－
8 DATE
Measurement start
date and time
Specify the output format for measurement
start date and time and whether to use UTC
time representation.
9 UNIQUE WELL ID WELL ID
－
10 API NUMBER API number
－
11 LICENSE No License number
－
12 Date Type Output data selection
Select whether to output each of the
following data types:
Length (actual distance)
Depth (depth)
Temp(temperature)
ST(stokes intensity data)
AS(anti-Stokes intensity data)
CFL (Calculated fiber loss)
Select either Length or Depth but not both for
distance-related data.
13 Unit of Distance Unit of distance
Select from:
m(meter)
feet
yard
mile
14
Unit of
Temperature
Unit of temperature
Select from:
K(kelvin)
degC(Centigrade)
degF(Fahrenheit)
For Items No.1 to No.11 above, the specified data values are output to the CSV file.