YOKOGAWA DTSXL, User Manual, Page: 273 / 289

< PART – C Operation and Maintenance >
C-20
IM 39J06B40-01EN 14th Edition: May 30, 2022
- Replace batteries that have leaked as soon as possible.
- Replacing the battery clears the data storage memory and clock setting. Before
requesting for a battery replacement, back up the data (retained data, etc.) using a
software tool. Set the clock in the Maintenance window after replacing the battery.
SEE ALSO
The CPU module also uses a battery, which needs to be replaced regularly. For details, see the
STARDOM FCN/FCJ Guide (IM 34P02Q01-01E).

Replacing the Battery of DTSX3000
●
Preparation
Have on hand a new battery, as well as the necessary equipment for connecting to the
DTSX3000 from a PC.
●
Replacement Procedure
Follow the procedure below to replace the battery of a DTSX3000.
1. Perform the following steps in accordance with the replacement procedure of the
DTSX3000.
- Shut down the DTSX3000 and the CPU module.
- Turn off the power.
- Remove the sensor optical fiber and control network cable from the DTSX3000.
- Remove the DTSX3000 from the Base module.
2. Verify that the battery is connected by a cable at the back of the DTSX3000.
Figure Back view of DTSX3000
Batery
Connector