YOKOGAWA DTSXL, User Manual, Page: 138 / 289

< PART – B Software >
B-55
IM 39J06B40-01EN 14th Edition: May 30, 2022
B6.4.6. Web Server Configuration (Web)
You can specify DTSX3000 Web server authentication related items in Web server
configuration.
- Digest Authentication
Specify whether to enable or disable user authentication. Select yes to enable user
authentication. When enabled, user authentication requires a valid username and
password to be entered from a browser before allowing access to the DTSX3000.
Select no to disable user authentication. When user authentication is disabled, no
username and password is required so anyone can access the DTSX3000 system
settings.
- Non Authentication Top Dir0, Non Authentication Top Dir1
These settings are for maintenance purpose and are normally not used.
- HTTPS Enable
Specify whether to enable or disable HTTPS communication.
If you select yes, data exchange between a browser and the DTSX3000 is
encrypted by HTTPS communication. To enable HTTPS, you need to obtain
(purchase) or generate an SSL server certificate and store the certificate in the
DTSX3000.
How to enable HTTPS and how to update the SSL server certificate stored in the
DTSX3000 is described below.
After entering the above settings, click [Set]. Any changes are applied on the next
Reboot.
Initialize to factory settings.
Authentication enable.
Save the above settings to
DTSX3000.
Maintenance settings.
HTTPS enable.