YOKOGAWA DTSXL, User Manual, Page: 159 / 289

< PART – B Software >
B-76
IM 39J06B40-01EN 14th Edition: May 30, 2022
Up to 16 entries (the limit depends on whether an optical switch is installed and the
number of installed channels) can be configured in the sequence table as described
below.
- Use
Select the checkbox of a table entry to enable it.
- Principle
Select [Single End] for single-ended measurement or [Double End] for double-
ended measurement.
- Channel Near
Select a channel from Ch1 to Ch16 as the forward direction channel in double-
ended measurement.
- Channel far
Select a channel from Ch1 to Ch16 as the reverse direction channel in double-
ended measurement. This item is enabled only when double-ended measurement
(Double End) is selected. The selected channel must be different from the selected
forward direction channel.