YOKOGAWA DTSXL, User Manual, Page: 231 / 289

< PART – B Software >
B-148
IM 39J06B40-01EN 14th Edition: May 30, 2022
1. Connect to the DTSX3000.
Run WinSCP. After specifying the following settings on the displayed login dialog,
press the [Login] button.
Host name : Hostname or IP address of DTSX3000
Port Number : 22
User name, Password : Username and password of DTSX3000 user
Log in as a user with administrator authority (admin).
Protocol : Select SFTP
Tip
- If the number of existing connections to the DTSX3000 is already the maximum allowed, the
DTSX3000 rejects the login request from the SSH/SFTP, the client receives the following message
and connection fails.
Received message too long 1416589088
- If this message is displayed, check the number of existing connections, disconnect any existing
connection no longer required and then try connecting to the DTSX3000 again.
- The SSH/SFTP client may display a “host key does not match” message as shown below.
If this message is displayed, there is a possibility that you have connected to the computer of a
malicious attacker pretending to be the DTSX3000. In this case, abort the connection using
SSH/SFTP client, and check to ensure that neither the PC running the client software nor the
DTSX3000 shows any sign of being attacked.