YOKOGAWA DTSXL, User Manual, Page: 175 / 289

< PART – B Software >
B-92
IM 39J06B40-01EN 14th Edition: May 30, 2022
B7.4. Executing Measurement
B7.4.1. Executing Measurement and Checking Status
After specifying the above settings, you can start measurement.
You can also check created measurement data, reported errors and other statuses
during measurement.
SEE ALSO
For details on remote commands for executing measurement and checking statuses, see the
DTSX3000 Communications (Modbus) Manual.
B7.5. Optical Switch (optional)
When used with an optional optical switch, which is available as a separate purchase,
the DTSX3000 allows up to 16 optical fibers to be connected for multi-channel
measurement by auto channel switching. The optical switch is available in 3 models
supporting 2 channels, 4 channels and 16 channels respectively to suit different
applications. For details on how to connect the optical switch and the DTSX3000, as
well as how to connect optical fibers, see the Hardware part of this manual.
TIP
The optical switch can be controlled by the DTSX3000 to perform channel switching or other
operations according to user-defined sequence tables so remote control from a PC is not required.
SEE ALSO
For details on how to connect the optical switch and the DTSX3000, as well as how to connect sensor
optical fibers, see chapter A5.