YOKOGAWA DTSXL, User Manual, Page: 277 / 289

< PART – C Operation and Maintenance >
C-24
IM 39J06B40-01EN 14th Edition: May 30, 2022
- If the battery is leaking electrolyte or releasing odor, immediately dispose of the
battery. Failure to do so may result in corroded metal due to the leaked electrolyte.
- Do not solder the battery directly.
The glass seal, vent (safety valve) or other parts of the battery may be damaged by
heat, causing the battery to leak electrolyte, generate heat, burst or ignite.
- Do not remove or damage the exterior label of the battery (heat shrinkable tube).
The battery may be shorted and leak electrolyte, generate heat, burst or ignite.
- Do not drop or throw the battery or otherwise apply strong impact.
The battery may leak electrolyte, generate heat, burst or ignite.
- Do not deform the battery.
The glass seal or vent (safety valve) of the battery may be damaged, causing the
battery to leak electrolyte, generate heat, burst or ignite.
- Do not use or leave the battery in a high-temperature environment, such as a place
exposed to direct sunlight or inside a car parked under the hot summer sun. Doing
so may cause the battery to leak electrolyte, generate heat or burst.
- Do not wet the battery with liquid such as water. Doing so may cause the battery to
generate heat.
IMPORTANT
- Use a lithium battery designed exclusively for use with DTSX3000.