YOKOGAWA DTSXL, User Manual, Page: 130 / 289

< PART – B Software >
B-47
IM 39J06B40-01EN 14th Edition: May 30, 2022
- Host Name
Optionally specify a hostname for the DTSX3000. A hostname must begin and end
with an alphanumeric character, consist only of alphanumeric characters, the period
(.) character and the hyphen (-) character, and be no longer than 32 characters.
- IP Address
Specify an IP address, which must consist of only numeric characters and the
period (.) character, and be no longer than 15 characters.
- Subnet Mask
Specify a subnet mask, which must consist of only numeric characters and the
period (.) character, and be no longer than 15 characters.
- Default GW
Specify the IP address of the default gateway, which must consist of only numeric
characters and the period (.) character, and be no longer than 15 characters.
- Domain0, Domain1
Up to 2 domain names can be specified. A domain name must begin and end with
an alphanumeric character, consist only of alphanumeric characters, the period (.)
character and the hyphen (-) character, and be no longer than 32 characters.
- DNS Server0, DNS Server1
Up to 2 DNS servers can be specified. Specify the IP address of the DNS server to
be registered as required.
- IP Table Enable
This setting is for maintenance use and should always be set to yes.
- Etchosts0 – Etchosts15
Up to 15 pairs of IP address and hostname combinations can be registered.
After specifying the required settings, click [Set] to save it to the DTSX3000. The new
settings will be applied on the next reboot.
Tip
-- Only Internet protocol IPv4 is supported. Protocol IPv6 is not supported.
- The host name cannot be modified if HTTPS is enabled or if the HTTPS Enable described in
Section B6.4.6, “Web Server Configuration” is set to yes.