manualshive.com logo in svg

YOKOGAWA DLM4038, User Manual

The YOKOGAWA DLM4038 is a high-performance digital oscilloscope designed for precise waveform analysis. Get the most out of your device by downloading the User Manual for free from manualshive.com. This comprehensive manual will guide you through all the features and functions of the DLM4038, ensuring optimal performance.

Share
Download
background image

5-55

IM DLM4038-17EN

Commands

1 

2 

3 

4 

5 

6

App

Index

Command

Function

Page

:TRIGger{[:ATRigger]|:BTRigger}

:SPATtern:LATCh:POLarity

Sets or queries the latch signal polarity for user-defined bus signal triggering. 5-296

:TRIGger{[:ATRigger]|:BTRigger}

:SPATtern:LATCh:SOURce

Sets or queries the latch signal for user-defined bus signal triggering.

5-296

:TRIGger{[:ATRigger]|:BTRigger}

:SPATtern:PATTern

Sets or queries the data condition for user-defined bus signal triggering in 

binary notation.

5-296

:TRIGger{[:ATRigger]|:BTRigger}

:SPATtern:PFORmat

Sets or queries the input format, which is one of the data conditions, for user-

defined bus signal triggering.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI?

Queries all SPI bus signal trigger settings.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:BITorder

Sets or queries the bit order of the SPI bus signal trigger data.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:CLOCk?

Queries all clock signal settings for SPI bus signal triggering.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:CLOCk:POLarity

Sets or queries the clock signal polarity for SPI bus signal triggering.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:CLOCk:SOURce

Sets or queries the clock signal for SPI bus signal triggering.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:CS?

Queries all chip select signal settings for SPI bus signal triggering.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:CS:ACTive

Sets or queries the chip select signal active state for SPI bus signal 

triggering.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:CS:SOURce

Sets or queries the chip select signal for SPI bus signal triggering.

5-297

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>?

Queries all data signal settings for SPI bus signal triggering.

5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:BCOunt

Sets or queries the starting position of data comparison for SPI bus signal 

triggering.

5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:CONDition

Sets or queries the data comparison condition (true or false) for SPI bus 

signal triggering.

5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:DBYTe

Sets or queries the data size (in bytes) for SPI bus signal triggering.

5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:HEXa<y>

Sets a data value for SPI bus signal triggering in hexadecimal notation.

5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:MODE

Sets or queries the data enable/disable condition for SPI bus signal triggering 

(on/off).

5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:PATTern<y>

Sets or queries the data value for SPI bus signal triggering in binary notation. 5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:PFORmat

Sets or queries the data input format, which is one of the data conditions, for 

SPI bus signal triggering.

5-298

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:DATA<x>:SOURce

Sets or queries the data signal for SPI bus signal triggering.

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:SPI:MODE

Sets or queries the wiring system (three-wire or four-wire) for SPI bus signal 

triggering.

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:TYPE

Sets or queries the trigger type.

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:UART?

Queries all UART signal trigger settings.

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:UART:BITorder

Sets or queries the UART signal trigger bit order.

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:UART:BRATe

Sets or queries the UART signal trigger bit rate (data transfer rate).

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:UART:DATA?

Queries all UART signal trigger data settings.

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:UART:DATA:ASCii

Sets the UART bus signal trigger data in ASCII format.

5-299

:TRIGger{[:ATRigger]|:BTRigger}

:UART:DATA:CONDition

Sets or queries the data comparison condition (true or false) for UART signal 

triggering.

5-300

:TRIGger{[:ATRigger]|:BTRigger}

:UART:DATA:CSENsitive

Sets or queries whether to distinguish uppercase and lowercase letters in 

ASCII data for the UART bus signal trigger.

5-300

:TRIGger{[:ATRigger]|:BTRigger}

:UART:DATA:DBYTe

Sets or queries the number of data bytes for UART signal triggering.

5-300

:TRIGger{[:ATRigger]|:BTRigger}

:UART:DATA:HEXa<x>

Sets the data for UART signal triggering in hexadecimal notation.

5-300

5.1  List of Commands

Summary of Contents for DLM4038






















































































































































































































































































































































































Reviews:

No comments

Related manuals for DLM4038

GE Ettan IPGphor 3 Instrument User Manual preview
Ettan IPGphor 3
Brand: GE Pages: 64
GE AMX 4+ Technical Publications preview
AMX 4+
Brand: GE Pages: 56
GE AMX 4+ Technical Manual preview
AMX 4+
Brand: GE Pages: 132
GE AKTAprocess Site Preparation Manual preview
AKTAprocess
Brand: GE Pages: 16
GE Logiq 500 Advanced Reference Manual preview
Logiq 500
Brand: GE Pages: 474
KaVo K4 Operating Instructions Manual preview
K4
Brand: KaVo Pages: 13
vc999 K3 Operating Instruction preview
K3
Brand: vc999 Pages: 52
JB-Lighting P4 Operating Instructions Manual preview
P4
Brand: JB-Lighting Pages: 60
Baoding Longer Precision Pump YZ Series User Manual preview
YZ Series
Brand: Baoding Longer Precision Pump Pages: 6
vanEE AI Series User'S And Installer'S Manual preview
AI Series
Brand: vanEE Pages: 52
Caddon Hives WBC Assembly Instructions preview
WBC
Brand: Caddon Hives Pages: 3
Raven Hawkeye Start Manual preview
Hawkeye
Brand: Raven Pages: 12
Zero 88 FLX Quick Start Manual preview
FLX
Brand: Zero 88 Pages: 20
Kapriol COMBI Manufacturer'S Instruction And Information preview
COMBI
Brand: Kapriol Pages: 32
Cabletron Systems 38 User Manual preview
38
Brand: Cabletron Systems Pages: 33
i-CAT FLX Installation Training preview
FLX
Brand: i-CAT Pages: 32
jcb TFT Service Manual preview
TFT
Brand: jcb Pages: 41
Gatekeeper ITSS Installation Manual preview
ITSS
Brand: Gatekeeper Pages: 8

Brands by name

Popular brands

Load more brands