5-93
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:CURSor[:TY]:VERTical:JUMP
Function
Makes a vertical cursor in the T-Y display jump to
the specified zoom waveform.
Syntax
:CURSor[:TY]:VERTical:JUMP {C1_Z1|
C1_Z2|C2_Z1|C2_Z2}
Example
:CURSOR:TY:VERTICAL:JUMP C1_Z1
Description Jumps to the center of the zoom waveform. C1
and C2 are used to indicate V cursors Cursor1
and Cursor2.
:CURSor[:TY]:VERTical:PERDt?
Function
Queries all time axis settings for 1/ΔT, which is
measured between the ΔT cursors.
Syntax
:CURSor[:TY]:VERTical:PERDt?
:CURSor[:TY]:VERTical:PERDt:STATe
Function
Sets or queries the on/off status of the 1/ΔT,
which is measured between the ΔT cursors.
Syntax
:CURSor[:TY]:VERTical:PERDt:STATe {<
Boolean>}
:CURSor[:TY]:VERTical:PERDt:STATe?
Example
:CURSOR:TY:VERTICAL:PERDT:STATE ON
:CURSOR:TY:VERTICAL:PERDT:STATE?
-> :CURSOR:TY:VERTICAL:PERDT:STATE 1
:CURSor[:TY]:VERTical:PERDt:VALue?
Function
Queries the 1/ΔT value, which is measured
between the ΔT cursors.
Syntax
:CURSor[:TY]:VERTical:PERDt:VALue?
Example
:CURSOR:TY:VERTICAL:PERDT:VALUE?
-> :CURSOR:TY:VERTICAL:PERDT:
VALUE 2.50E+06
:CURSor[:TY]:VERTical:POSition<x>
Function
Sets or queries the position of a ΔT cursor.
Syntax
:CURSor[:TY]:VERTical:POSition
<x> {<NRf>}
:CURSor[:TY]:VERTical:POSition<x>?
<x> = 1 to 2
<NRf> = −5 to 5 (in steps of 10 divisions/display
record length)
Example
:CURSOR:TY:VERTICAL:POSITION1 2
:CURSOR:TY:VERTICAL:POSITION1?
-> :CURSOR:TY:VERTICAL:POSITION1 2.0
0E+00
:CURSor[:TY]:VERTical:T<x>?
Function
Queries all time axis settings for a ΔT cursor.
Syntax
:CURSor[:TY]:VERTical:T<x>?
<x> = 1 to 2
:CURSor[:TY]:VERTical:T<x>:STATe
Function
Sets or queries the on/off status of the time value
of a ΔT cursor.
Syntax
:CURSor[:TY]:VERTical:T<x>:STA
Te {<Boolean>}
:CURSor[:TY]:VERTical:T<x>:STATe?
<x> = 1 to 2
Example
:CURSOR:TY:VERTICAL:T1:STATE ON
:CURSOR:TY:VERTICAL:T1:STATE?
-> :CURSOR:TY:VERTICAL:T1:STATE 1
:CURSor[:TY]:VERTical:T<x>:VALue?
Function
Queries the time value of a ΔT cursor.
Syntax
:CURSor[:TY]:VERTical:T<x>:VALue?
<x> = 1 to 2
Example
:CURSOR:TY:VERTICAL:T1:VALUE?
-> :CURSOR:TY:VERTICAL:T1:
VALUE −2.50E−06
:CURSor[:TY]:VERTical:TRACe
Function
Sets or queries the source waveform that you
want to measure using the ΔT cursors.
Syntax
:CURSor[:TY]:VERTical:TRACe {<NRf>|A
LL|MATH<x>}
:CURSor[:TY]:VERTical:TRACe?
<NRf> = 1 to 8
<x> = 1 to 4
Example
:CURSOR:TY:VERTICAL:TRACE 1
:CURSOR:TY:VERTICAL:TRACE?
-> :CURSOR:TY:VERTICAL:TRACE 1
:CURSor[:TY]:VERTical:V<x>?
Function
Queries all vertical axis settings for a ΔT cursor.
Syntax
:CURSor[:TY]:VERTical:V<x>?
<x> = 1 to 2
:CURSor[:TY]:VERTical:V<x>:STATe
Function
Sets or queries the on/off status of the vertical
value of a ΔT cursor.
Syntax
:CURSor[:TY]:VERTical:V<x>:STA
Te {<Boolean>}
:CURSor[:TY]:VERTical:V<x>:STATe?
<x> = 1 to 2
Example
:CURSOR:TY:VERTICAL:V1:STATE ON
:CURSOR:TY:VERTICAL:V1:STATE?
-> :CURSOR:TY:VERTICAL:V1:STATE 1
5.10 CURSor Group
