App-2
IM DLM4038-17EN
Appendix 2 Error Messages
This section explains communication error messages.
• Messages can be displayed in English or in another language on the DLM4000. However, when
they are read from a PC or other similar device, messages are displayed in English.
• If servicing is necessary to solve the problem indicated by a message, contact your nearest
YOKOGAWA dealer.
• Only communication error messages are listed here. For other error messages, see the
User’s
Manual IM DLM4038-02EN
.
• Communication syntax errors
• Communication execution errors
• Device-specific and other errors
• Communication query errors
• System error (communication)
100 to 199
200 to 299
300 to 399
400 to 499
399
Listed below
Communication Syntax Errors (100 to 199)
Code Message
Corrective Action
Page
100
Command error.
Check the spelling of the command.
Chapter 5
102
Syntax error.
A syntax error not covered by error codes 100 to 199.
Chapters 4
and 5
103
Invalid separator.
Separate data values with a comma.
4-1
104
Data type error.
Use the correct data type for each parameter.
4-6 and 4-7
105
GET not allowed.
GET is not supported as a response to an interface
message.
3-6
108
Parameter not allowed.
Check the number of data values.
4-6 and
chapter 5
109
Missing parameter.
Be sure to include all necessary data values.
4-6 and
chapter 5
111
Header separator error.
Use a comma to separate each header from its data.
4-1
112
Program mnemonic too long.
Check the command length.
Chapter 5
113
Undefined header.
Check the header.
4-4 and
chapter 5
114
Header suffix out of range.
Check the header.
4-4 and
chapter 5
120
Numeric data error.
A value must be specified where the syntax contains
<NRf>.
4-6
123
Exponent too large.
Where the syntax contains <NR3>, make the exponent
that follows E smaller.
4-6 and
chapter 5
124
Too many digits.
Limit numeric values to 255 digits or less.
4-6 and
chapter 5
128
Numeric data not allowed.
Use a data type other than <NRf>.
4-6 and
chapter 5
131
Invalid suffix.
Check the units where the syntax contains <Voltage>,
<Time>, <Frequency>, or <Current>.
4-6
134
Suffix too long.
Check the units where the syntax contains <Voltage>,
<Time>, <Frequency>, or <Current>.
4-6
138
Suffix not allowed.
Units of measurement can only be used where the
syntax contains <Voltage>, <Time>, <Frequency>, or
<Current>.
4-6
141
Invalid character data.
Be sure to select one of the listed choices when the
syntax contains {...|...|...}.
4-7 and
chapter 5
144
Character data too long.
Check the spelling of the strings when the syntax
contains {...|...|...}.
4-7 and
chapter 5
148
Character data not allowed.
Use a data type other than <String data>.
4-5 and
chapter 5
150
String data error.
Enclose parameters with single or double quotation
marks where the syntax contains <String data>.
4-7
