manualshive.com logo in svg

YOKOGAWA DLM4038, User Manual

The YOKOGAWA DLM4038 is a high-performance digital oscilloscope designed for precise waveform analysis. Get the most out of your device by downloading the User Manual for free from manualshive.com. This comprehensive manual will guide you through all the features and functions of the DLM4038, ensuring optimal performance.

Share
Download
background image

5-13

IM DLM4038-17EN

Commands

1 

2 

3 

4 

5 

6

App

Index

Command

Function

Page

 

HCOPy Group

:HCOPy?

Queries all screen capture data output settings.

5-114

:HCOPy:ABORt

Stops data output and paper feeding.

5-114

:HCOPy:COMMent

Sets or queries the comment at the lower right of the screen.

5-114

:HCOPy:DIRection

Sets or queries the data output destination.

5-114

:HCOPy:EXECute

Executes data output.

5-114

:HCOPy:MULTitarget?

Queries all multi target feature settings.

5-114

:HCOPy:MULTitarget:PRINter

Sets or queries whether the multi target feature will send output to the built-in 

printer.

5-114

:HCOPy:MULTitarget:NETPrinter

Sets or queries whether the multi target feature will send output to a network 

printer.

5-114

:HCOPy:MULTitarget:FILE

Sets or queries whether the multi target feature will send output to a file.

5-114

:HCOPy:MULTitarget:WAVeform

Sets or queries whether the multi target feature will send output to a 

waveform file.

5-114

:HCOPy:NETPrint?

Queries all network printer output settings.

5-114

:HCOPy:NETPrint:MODE

Sets or queries whether the DLM4000 will print to the network printer in 

normal copy or hard copy mode.

5-114

:HCOPy:NETPrint:TONE

Sets or queries the network printer output color setting.

5-114

:HCOPy:NETPrint:TYPE

Sets or queries the network printer output command type.

5-115

:HCOPy:PRINter?

Queries all built-in printer output settings.

5-115

:HCOPy:PRINter:MAG

Sets or queries the magnification used when the DLM4000 prints to the built-

in printer in long copy mode.

5-115

:HCOPy:PRINter:MODE

Sets or queries whether the DLM4000 will print to the built-in printer in short, 

long, or hard copy mode.

5-115

:HCOPy:PRINter:RANGe

Sets or queries the source window used when the DLM4000 prints to the 

built-in printer in long copy mode.

5-115

:HCOPy:PRINter:REPort

Sets or queries whether the DLM4000 will print additional information on the 

built-in printer.

5-115

:HCOPy:PRINter:TRANge

Sets or queries the output range used when the DLM4000 prints to the built-

in printer in long copy mode.

5-115

 

HISTory Group

:HISTory?

Queries all of the settings for the history feature.

5-116

:HISTory:AVERage

Sets or queries the highlight display mode for history waveforms.

5-116

:HISTory:DISPlay

Sets or queries the display record start and end numbers.

5-116

:HISTory:DMODe

Sets or queries the history waveform display mode.

5-116

:HISTory:RECord

Sets or queries the history waveform source record.

5-116

:HISTory:RECord? MINimum

Queries the minimum history waveform record number.

5-116

:HISTory:REPLay?

Queries all of the settings for the history waveform replay feature.

5-116

:HISTory:REPLay:JUMP

Jumps to the specified record number in a history waveform.

5-116

:HISTory:REPLay:SPEed

Sets or queries the history waveform replay speed.

5-116

:HISTory:REPLay:STARt

Starts replaying a history waveform in the specified direction.

5-116

:HISTory:REPLay:STOP

Stops history waveform replaying.

5-116

:HISTory:SEARch?

Queries all history waveform search settings.

5-116

:HISTory[:SEARch]:ABORt

Aborts searching.

5-116

:HISTory[:SEARch]:EXECute

Executes searching. This is an overlap command.

5-116

:HISTory[:SEARch]:LOGic

Sets or queries the history waveform search logic.

5-117

:HISTory[:SEARch]:NUMBer<x>?

Queries all of the settings for a search condition.

5-117

:HISTory[:SEARch]:NUMBer<x>:CON

Dition

Sets or queries the search criterion of a search condition.

5-117

:HISTory[:SEARch]:NUMBer<x>:MO

DE

Sets or queries the search mode of a search condition.

5-117

:HISTory[:SEARch]:NUMBer<x>:PAR

ameter?

Queries all parameter search settings.

5-117

:HISTory[:SEARch]:NUMBer<x>:PAR

ameter:ITEM

Sets or queries the specified waveform parameter's item for parameter 

searching.

5-117

:HISTory[:SEARch]:NUMBer<x>:PAR

ameter:LIMit

Sets or queries the specified waveform parameter's upper and lower limits 

for parameter searching.

5-117

:HISTory[:SEARch]:NUMBer<x>:PAR

ameter:TRACe

Sets or queries the specified waveform parameter's source waveform for 

parameter searching.

5-118

5.1  List of Commands

Summary of Contents for DLM4038






















































































































































































































































































































































































Reviews:

No comments

Related manuals for DLM4038

Varec 6700 Installation And Operation Instructions Manual preview
6700
Brand: Varec Pages: 74
Halyard MIC Series Instructions For Use Manual preview
MIC Series
Brand: Halyard Pages: 84
PAIDI Twist Instructions For Use Manual preview
Twist
Brand: PAIDI Pages: 48
Camozzi 50 Series Mounting Instructions preview
50 Series
Brand: Camozzi Pages: 2
Parata Mini Customer Manual preview
Mini
Brand: Parata Pages: 40
Zenbooth Duo Build Instructions preview
Duo
Brand: Zenbooth Pages: 60
ParaBody 808 User Manual preview
808
Brand: ParaBody Pages: 6
Sailmon E4 Installation Manual preview
E4
Brand: Sailmon Pages: 10
B&W Tek Sol Series User Manual preview
Sol Series
Brand: B&W Tek Pages: 12
b&o Beocord 1200 Operating Instructions Manual preview
Beocord 1200
Brand: b&o Pages: 46
Rain-Flo Irrigation 2370 Operating Manual preview
2370
Brand: Rain-Flo Irrigation Pages: 16
Hantek Tablet1000 Series User Manual preview
Tablet1000 Series
Brand: Hantek Pages: 98
TAKAYA APT-9411 Series Service Manual preview
APT-9411 Series
Brand: TAKAYA Pages: 77
Tadano TR-800XXL4 Service Manual preview
TR-800XXL4
Brand: Tadano Pages: 402
Orliman STOMAMED COL-160 Manual preview
STOMAMED COL-160
Brand: Orliman Pages: 12
Masterclock CS5-LAN User Manual preview
CS5-LAN
Brand: Masterclock Pages: 19
Garmin Tacx Boost Bundle User Manual preview
Tacx Boost Bundle
Brand: Garmin Pages: 12
Daavlin UV Series Operation Manual preview
UV Series
Brand: Daavlin Pages: 55

Brands by name

Popular brands

Load more brands