![background image](http://html2.mh-extra.com/html/yealink/t46g-skype-for-business-edition/t46g-skype-for-business-edition_administrators-manual_3244716364.webp)
Yealink Skype for Business HD IP Phones Administrator Guide
350
Parameter
Permitted Values
Default
WAN (Internet) port to the PC (LAN) port.
0
-Disabled
1
-Enabled
If it is set to 1 (Enabled), all data packets from WAN port can be received by PC port.
Note:
It works only if the value of the parameter “network.pc_port.enable” is set to 1 (Auto
Negotiate). If you change this parameter, the Skype for Business phone will reboot to
make the change take effect.
Web User Interface:
Network->Advanced->Span to PC->Span to PC Port
Phone User Interface:
None
To enable span to pc port via web user interface:
1.
Click on
Network
->
Advanced
.
2.
Select
Enabled
from the pull-down list of
Span to PC Port
.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4.
Click
OK
to reboot the Skype for Business phone.
Then you can use Sniffer, Ethereal or Wireshark software to capture the signal traffic.
Summary of Contents for T46G Skype For Business Edition
