![background image](http://html2.mh-extra.com/html/yealink/t46g-skype-for-business-edition/t46g-skype-for-business-edition_administrators-manual_3244716041.webp)
Getting Started
27
Parameters
Permitted Values
Default
0
-DHCP
1
-PPPoE (not applicable to T42G/T41P/T40P Skype for Business phones)
2
-Static IP Address
Note:
It works only if the value of the parameter “network.ip_address_mode” is set to 0
(IPv4) or 2 (IPv4 & IPv6). If you change this parameter, the Skype for Business phone will
reboot to make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4
To configure DHCP via web user interface:
1.
Click on
Network
->
Basic
.
2.
In the
IPv4 Config
block, mark the
DHCP
radio box.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4.
Click
OK
to reboot the Skype for Business phone.
To configure DHCP via phone user interface:
1.
Press
Menu->Advanced
(default password: admin) ->
Network
->
WAN Port
->
IPv4
.
2.
Press or , or the
Switch
soft key to select
DHCP
from the
Type
field.
3.
Press the
Save
soft key to accept the change.
The Skype for Business phone reboots automatically to make settings effective after a
period of time.
Summary of Contents for T46G Skype For Business Edition
