Yealink T46G Skype For Business Edition, Administrator'S Manual

Page: 250 / 421

Yealink Skype for Business HD IP Phones Administrator Guide
236
To configure LLDP feature via phone user interface:
1.
Press
Menu
->
Advanced
(default password: admin) ->
Network
->
LLDP
->
LLDP Status
.
2.
Press or , or the
Switch
soft key to select the desired value from the
LLDP Status
field.
3.
Enter the priority value (1-3600s) in the
Packet Interval
field.
4.
Press the
Save
soft key to accept the change.
The Skype for Business phone reboots automatically to make settings effective after a
period of time.
CDP
CDP (Cisco Discovery Protocol) allows Skype for Business phones to receive and/or transmit
device-related information from/to directly connected devices on the network that are also
using the protocol, and store the information about other devices.
When CDP feature is enabled on Skype for Business phones, the Skype for Business phones
periodically advertise their own information to the directly connected CDP-enabled switch. The
Skype for Business phones can also receive CDP packets from the connected switch. When the
VLAN configurations on the Skype for Business phones are different from the ones sent by the
switch, the Skype for Business phones perform an update and reboot. This allows the Skype for
Business phones to be plugged into any switch, obtain their VLAN IDs, and then start
communications with the call control.
Procedure
CDP can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure CDP.
Parameters:
network.cdp.enable
network.cdp.packet_interval
Local
Web User Interface
Configure CDP.
Navigate to
:
http://<phoneIPAddress>/servlet?
p=network-adv&q=load
Phone User Interface Configure CDP feature.
Details of Configuration Parameters:
Parameters Permitted Values Default
network.cdp.enable 0 or 1 1