Yamaha YZ426F(M)/LC, Owner'S Service Manual

Page: 458 / 608

5 - 23
CHAS
FRONT BRAKE AND REAR BRAKE
3. Install:
●
Spring 1
●
Brake pedal 2
●
O-ring 3
●
Bolt (brake pedal) 4
●
Clip 5
NOTE:
●
Apply the lithium soap base grease on the
bolt, O-ring and brake pedal bracket.
●
Install the clip with its stopper portion
a
fac-
ing inward.
New
T
R
.
.
19 Nm (1.9 m · kg, 13 ft · lb)
4. Install:
●
Pin 1
●
Plain washer 2
●
Cotter pin
3
NOTE:
After installing, check the brake pedal height.
Refer to “REAR BRAKE ADJUSTMENT” sec-
tion in the CHAPTER 3.
New
EC5A5900
Front brake hose
1. Install:
●
Brake hose 1
To brake hose holder 2 .
NOTE:
Before tightening the bolt (brake hose holder),
pass the brake hose in front of the axle boss
a
, then fit it into the hose groove
b
so that the
brake hose does not contact the nut (wheel
axle).
2. Install:
●
Hose cover 1
●
Plain washer 2
●
Bolt [hose cover (M8)] 3
●
Bolt [hose cover (M6)] 4
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
T
R
.
.
16 Nm (1.6 m · kg, 11 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)