Yamaha YZ426F(M)/LC, Owner'S Service Manual

Page: 192 / 608

3 - 25
INSP
ADJ
FRONT BRAKE ADJUSTMENT
3. Install:
●
Protector (rear brake)
●
Diaphragm
●
Master cylinder cap
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have disap-
peared.
j. Add brake fluid to the level line on the
reservoir.
WARNING
Check the operation of the brake after
bleeding the brake system.
EC362031
FRONT BRAKE ADJUSTMENT
1. Check:
●
Brake lever position
a
Standard brake lever position
a
:
82.5 mm (3.25 in)
2. Adjust:
●
Brake lever position
Loosen the locknuts
1 , then adjust the
lever position by changing their tighten-
ing position.
3. Tighten:
●
Locknut
CAUTION:
Be sure to tighten the locknuts, as it will
cause poor brake performance.
T
R .
.
7 Nm (0.7 m · kg, 5.1 ft · lb)